When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This is a listing to Order a vintage reissue made by hand following the Fender standardthe finish is nitro
Hard rock maple flat sawn cutslab or veneer rosewood fretboard1/4"face clay dots, or 7mm abalone, Mother of pearl2mm or 2.5mm side dots
Med Jumbo, vintage or Dunlop 6105 frets (narrow and tall)0.79" at first fret to0.99" at 12th fret (your choice of thickness)9.50" or 7.25" fretboard radius2.20" neck heel width1/4" X 11/32" two step tuning pegs holes
vintage single acting truss rod with the correct nutoval C, large C, soft V or hard V profileFrets are polished, leveled and roundededgesthis is a custom neck made by hand with highquality materials.
Please note this listing won't include the bone nut, tuners or decal set up or installation,for that you can purchase in my store apart, I do have those services available.You place the order and can message me to discussthe vintage specs you want,the constructiontakes around 4 weeks.I you want a detailedrelic job, please message me.
$25 priority mail with signature confirmation (local shipping)International buyers will be calculated Priority IntI construct this kind of necks following the vintage Fender specs the best I can,if you want a custom made vintage style neck, message me.I have the 2 pcs available and 1 piece, also the 70's style too (bullet)
Thank you!
