When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
4PCS 1.25" Wheel Spacers - 6x5.5 to 6x5.5 (6x139.7mm)
These wheel spacers keep the same 6x5.5 (6x139.7mm) bolt pattern while adding 1.25 inches of clearance between your tire and hub assembly, giving your vehicle a wider stance and extra clearance for larger tires, big brake calipers, and lift or leveling kits.
Specifications:
- Bolt Pattern: 6x5.5 (6x139.7mm), same on both sides
- Thickness: 1.25 inch
- Thread Pitch: 12x1.5
- Hub Bore: 108mm
- Recommended Install Torque: 70-80 Ft/Lbs
- Exterior Finish: Machined
Vehicle Fitment (6x5.5 bolt pattern hub):
- Acura: SLX 1996-1999
- Chevrolet: Colorado 2004-2014, LUV 1997-2005, S10 2016
- Dodge: D50 1979-1982, Ram 50 1985-1993
- Ford: Ranger 2013-2022
- GMC: Canyon 2004-2012
- Honda: Passport 1994-2002
- Toyota: 4Runner 1989-2022, FJ Cruiser 2007-2014, Land Cruiser 1982-1997
Before ordering, please verify your wheel studs are 12x1.5mm threads, that you have more than 1.25 inches of clearance between your fender and wheel/tire, and that your factory wheel studs are shorter than 1.25 inches. Wheel center bore should be no smaller than 108mm.
Installation Notes:
Use of a thread lock adhesive is encouraged during installation. The back of the wheel must sit flush against the spacer, and studs must not extend past the face of the spacer. Requires standard tire repair tools, a torque wrench, and a lug socket. Professional installation is recommended.
What's Included: 4 pcs Wheel Spacers (1.25 inch, 6x5.5 to 6x5.5).
