When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Product Feature:【Practical Function】 The blacksmith drift kit is specially designed for professional blacksmiths, knifemakers and beginners to drill holes to handle hand made tongs, hammers, axes, or tomahawks, etc. Finish forming holes quickly and perfectly through hot steel, helping you increase working efficiency a lot.【Built to Last】 The drifts are lightly sanded with 60-grit to provide a smooth drifting operation and feature a reverse taper on the struck end so they fall through the stock successfully when you drive the drift. If the drifts ever bend, simply bring them up to low heating, straighten them with light hammer blowing, and allow them to air cool. DE-Motor
Your best choice
Blacksmith Drift Kit Blacksmith Hammer Eye Drift Tool Set for Forging Tongs, Tomahawk, Axe (3 Pack)
Product Feature:
【Practical Function】
The blacksmith drift kit is specially designed for professional blacksmiths, knifemakers and beginners to drill holes to handle hand made tongs, hammers, axes, or tomahawks, etc. Finish forming holes quickly and perfectly through hot steel, helping you increase working efficiency a lot.
【Built to Last】
The drifts are lightly sanded with 60-grit to provide a smooth drifting operation and feature a reverse taper on the struck end so they fall through the stock successfully when you drive the drift. If the drifts ever bend, simply bring them up to low heating, straighten them with light hammer blowing, and allow them to air cool.
【Product Dimension】
Package includes 3 blacksmith drifts in different size to satisfy your demand. The large Tomahawk drift tool with small end size 3/8 x 3/4 inch, large end size 7/8 x 1 1/4 inch. The large hammer drift tool with small end size 5/8 x 7/8 inch, large end size 3/4 x 1 1/8 inch. The mouse ax drift tool with small end size 5/16 x 7/16 inch, large end size 5/8 x 7/8 inch.
【Easy Operation】
Drill a series of small holes as close together in the center of the work piece to be drifted. Once the holes are drilled, heat the item and use a cold chisel or similar tool to split the piece. And then heat the piece again and drive the drift through the hole. Tap the sides of the workpiece while continuing to drive the drift into the workpiece until the drift hole gets to the desired Guarantee】
If you're not satisfied with the product, simply return it in 30 days or get a replacement during 1 year warranty via our customer service. If your item is defective, incorrect, arrived damaged or any other problems, please contact us (include pictures if possible) and we will reply in 24 hours.
Product Designed for blacksmith beginner or seasoned blacksmiths and Knifemakers to use to form (Drift) the hole needed to handle hand-made hammers, axes, or tomahawks etc.
. Our Drift Kit provides you with exceptional forging strength, drilling/ punching the work piece giving you precise control over your work-piece while using heavy hammer blows over the anvil.
. These tools are forged with heavy-duty steel, built for long-term resilience and can withstand very high temperatures.
. The drift is approximately 11" long and oval Included: Blacksmith Knifemakers Tomahawk, Large Hammer and Mouse ax Drift Tool Set (3Pcs)
The large Tomahawk drift tool measures 3/8 x 3/4 at the small end and tapers tear drop up to 7/8 x 1 1/4 at the large end.
The large hammer drift tool measures 5/8 x 7/8 at the small end and tapers up to 3/4 x 1 1/8 at the large end.
The mouse ax drift tool measures 5/16 x 7/16 at the small end and tapers up to 5/8 x 7/8 at the large end.
Item SpecificsBrand DE-AutoType Blacksmith Drift SetColor BlackApplication For Forging Tongs, Hammer, AxeMaterial SteelNumber of pieces 3Warranty 1 YearSet or Single Item SetCountry of Origin China
Payment
1.Payment methods accepted:Payoneer.Our payoneer account allows you to pay by credit card, debit card and your paypal balance.
Shipping
1.We ship items toYour address.Pleasemake sure your address is correctbefore you pay, cause it cannot be changed once the order shipped out.
2.All of our items are shipped from ourWarehouse inUSA.
3.Please feel free to contact us by "Contact member"if you cannot get your order on time.
Returns
1.Return to uswithin 60 daysfrom the delivery date for exchange or refund.Refund will be given as Money back or item exchange (buyer's choice).
2.Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all NON-seller mistake returns for refund are subject to 20% re-stocking fee.
3.If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Contact Us
Please contact us via using"Contact member". We will respond within 24hours or less.Thank you for your understanding.
DE-Motor
Your best choice
DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Blacksmith Drift Kit Blacksmith Hammer Eye Drift Tool Set for Forging Tongs, Tomahawk, Axe (3 Pack)
Product Feature:
【Practical Function】
The blacksmith drift kit is specially designed for professional blacksmiths, knifemakers and beginners to drill holes to handle hand made tongs, hammers, axes, or tomahawks, etc. Finish forming holes quickly and perfectly through hot steel, helping you increase working efficiency a lot.
【Built to Last】
The drifts are lightly sanded with 60-grit to provide a smooth drifting operation and feature a reverse taper on the struck end so they fall through the stock successfully when you drive the drift. If the drifts ever bend, simply bring them up to low heating, straighten them with light hammer blowing, and allow them to air cool.
【Product Dimension】
Package includes 3 blacksmith drifts in different size to satisfy your demand. The large Tomahawk drift tool with small end size 3/8 x 3/4 inch, large end size 7/8 x 1 1/4 inch. The large hammer drift tool with small end size 5/8 x 7/8 inch, large end size 3/4 x 1 1/8 inch. The mouse ax drift tool with small end size 5/16 x 7/16 inch, large end size 5/8 x 7/8 inch.
【Easy Operation】
Drill a series of small holes as close together in the center of the work piece to be drifted. Once the holes are drilled, heat the item and use a cold chisel or similar tool to split the piece. And then heat the piece again and drive the drift through the hole. Tap the sides of the workpiece while continuing to drive the drift into the workpiece until the drift hole gets to the desired Guarantee】
If you're not satisfied with the product, simply return it in 30 days or get a replacement during 1 year warranty via our customer service. If your item is defective, incorrect, arrived damaged or any other problems, please contact us (include pictures if possible) and we will reply in 24 hours.
Product Designed for blacksmith beginner or seasoned blacksmiths and Knifemakers to use to form (Drift) the hole needed to handle hand-made hammers, axes, or tomahawks etc.
. Our Drift Kit provides you with exceptional forging strength, drilling/ punching the work piece giving you precise control over your work-piece while using heavy hammer blows over the anvil.
. These tools are forged with heavy-duty steel, built for long-term resilience and can withstand very high temperatures.
. The drift is approximately 11" long and oval Included: Blacksmith Knifemakers Tomahawk, Large Hammer and Mouse ax Drift Tool Set (3Pcs)
The large Tomahawk drift tool measures 3/8 x 3/4 at the small end and tapers tear drop up to 7/8 x 1 1/4 at the large end.
The large hammer drift tool measures 5/8 x 7/8 at the small end and tapers up to 3/4 x 1 1/8 at the large end.
The mouse ax drift tool measures 5/16 x 7/16 at the small end and tapers up to 5/8 x 7/8 at the large end.
Item SpecificsBrand :DE-AutoType :Blacksmith Drift SetColor :BlackApplication :For Forging Tongs, Hammer, AxeMaterial :SteelNumber of pieces :3Warranty :1 YearSet or Single Item :SetCountry of Origin :China
PaymentShippingReturnsContact Us
1.Payment methods accepted:Payoneer.Our payoneer account allows you to pay by credit card, debit card and your paypal balance.
1.We ship items toYour address.Pleasemake sure your address is correctbefore you pay, cause it cannot be changed once the order shipped out.
2.All of our items are shipped from ourWarehouse inUSA.
3.Please feel free to contact us by "Contact member"if you cannot get your order on time.
1.Return to uswithin 60 daysfrom the delivery date for exchange or refund.Refund will be given as Money back or item exchange (buyer's choice).
2.Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all NON-seller mistake returns for refund are subject to 20% re-stocking fee.
3.If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Please contact us via using"Contact member". We will respond within 24hours or less.Thank you for your understanding.
All rights reserved.
Shop CategoryStore Home Home Garden Accessories Car Truck Accessories Motorcycle Accessories Marine Boat Accessories Ford Accessories Detroit Diesel Accessories Jeep Accessories Dodge Truck Accessories Cummins Accessories GM Accessories Caterpillar Accessories DIY Blacksmith Accessories Jacks & Jack Stands Seal Part Chevy Accessories OtherHot Item BN2BP125FWX-CS 16 Foot Broadcast Spray Full Pattern Boomless Nozzle for 2GPM 12v USD 18.40 14×1×1/8\" Urethane Band Saw Tires 2PCS for Craftsman 3AD92501 Delta 905145 More USD 17.60 For Ford Tractors 2N 8N 9N Ignition Coil Resistor Assembly A8NN12250A USD 15.80 Samsung Washer Tub Bearing ＆ Seal Kit WF393 DC62-00156A 6601-002637 6601-000148 USD 34.99 G109423 Hydraulic Cylinder Seal Kit for Case 1543273C1 G105545 Rod 2\'\' Bore 4\'\' USD 21.50 Picture
New List Item For Log Splitter Hydraulic Pump Mount for 8-15 HP Engines for SpeeCo Splitmaster USD 47.52 Tool 08350 DM3MECH Mechanical Hot Tapping Machine Complete Kit for NPT USD 652.00 AR2546 Pump 18mm Piston Kit Ceramic Plunger For Annovi Reverberi RK RKA RKV XRCA USD 75.50 Third Function Valve Kit for Kubota L2501 L3200 L3301 L3901 Tractors LA 524 525 USD 697.99 Mortar Pestle Tool Set Rock-Ore Crusher Pulverizer Quartz Smashing Ore Samples USD 70.00 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us
