When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This is a BRAND NEW Pentair LCD screen and keypad control board assembly for variable-speed Pentair IntelliFlo pool pumps.
If your pump still runs, but the display is blank or the buttons don't work, THIS is the part you need to fix it. It is very easy to swap this circuit board into your existing drive....just remove the top cover, remove the plastic keypad housing, pry it apart, and swap the board inside. Pentair does NOT sell the keypad by itself....they want you to buy a whole new drive for nearly $1000 (insane), so here is your chance to get your pool pump running again for less.
This replacement board works with ALL 1st and 2nd generation (2020 and older) Pentair IntelliFlo and Sta-Rite IntelliPro pool pump models, such as VS, VF, VSF, VS+SVRS, etc,
I will ship USPS Priority Mail for FREE. Thanks for looking!
Note: If you have a plastic hinge cover with a teardrop-shaped bump on top, this board will swap in easily (search for my youtube video). If you have a flat cover, this board will still work, but you must access it from the front by peeling up the rubber keypad membrane and lifting the keypad/screen housing out towards you. There is no access from underneath the metal lid. I recommend using a credit card or similar to work around the perimeter of the rubber to release the glue.
